Posts Tagged ‘tank washers’

Motor-Driven Tank Washers

Thursday, August 13th, 2009

Motor-driven tank washers use solid stream nozzles to provide high-impact cleaning and remove stubborn residue. The motor, air or electric, drives the nozzle assembly. Two to four nozzles revolve around the central axis of the nozzle assembly. Motors are positioned outside the tank for longer wear life.

Motorized tank washers offer independent control of the liquid pressure for cleaning and the rotational speed (cycle time) to optimize the cleaning process. Units are customizable to your operations by changing flow rates by using different nozzles or by adjusting inlet pressure.

Various shaft lengths available.

AA290 Tank Washer – For tanks up to 80′ (24.4 m) dia.

  • Choice of air or explosion-proof electric motors
  • Choice of two or four nozzle hubs
  • Operates at pressures up to 250 psi (17 bar)
  • Flow rates range from 22 to 200 gpm (85 to 752 l/min)
  • Material: 316 stainless steel, TEFLON® seals
  • Minimum tank opening: 7.25″ to 8.25″ (184 to 210 mm) depending on nozzle hub

AA290

AA290
AA190 Tank Washer – For tanks up to 34′ (10.4 m) dia.

  • Choice of air, high-pressure air, electric or explosion-proof electric motors
  • Variable speed air motor provides flexible wash cycle times – five to 11 minutes
  • Wide variety of flange mounting options
  • Operates at pressures up to 500 psi (35 bar) (High-pressure version up to 1000 psi/70 bar)
  • Flow rates range from 3.1 to 44 gpm (11.8 to 170 l/min)
  • Material: 316 stainless steel, TEFLON seals
  • Minimum tank opening: 3.75″ (95 mm)

AA190

AA190
AA090 Tank Washer – For tanks up to 8′ (2.4 m) dia.

  • Choice of air, electric or explosion-proof electric motors
  • Operates at pressures up to 500 psi (35 bar)
  • Flow rates range from 1.5 to 7.3 gpm (5.7 to 28 l/min)&gt
  • Material: 316 stainless steel, TEFLON seals &gt
  • Minimum tank opening: 2.3″ (59 mm)

AA090

AA090

TEFLON is a registered trademark of E.I. DuPont de Nemours and Company

Tags: ,
Posted in Products | No Comments »

TankJet™ 4 Fluid-Driven Tank Washers

Thursday, August 13th, 2009
For high-impact cleaning of large tanks, vats or vessels, our new fluid-driven TankJet 4 offers many benefits including better cleaning than competitive units. Providing more consistent impact over the entire pressure range, TankJet 4 tank washers remove even the stickiest of residues.

TankJet 4 Overview:

  • Our TankJet 4 spray nozzles produce the best solid stream spray available. Special nozzle vanes reduce turbulence and improve stream integrity. Better stream integrity increases impact and cleaning effectiveness
  • Nozzles rotate 360° in horizontal and vertical planes creating a crisscrossing pattern to thoroughly clean tanks
  • Cleans tanks up to 98’ (30 m) in dia.
  • No motors – TankJet 4 Tank Washers are fluid-driven
  • Sleek and compact – fits in small tank openings
  • Lightweight for easy portability
  • Choice of pin version for permanent installation or clutch version with free-spinning nozzle hub for easy insertion and removal from tank
  • Customizable to your operation — TankJet 4 can be used for high-concentration chemical recirculation cleaning or low-pressure, high-volume cleaning
 TankJet™ 4 Fluid-Driven Tank Washers
Ideal for Use in Many Applications:

  • Blenders
  • Breweries
  • Food processing
  • Petrochemical
  • Pulp storage
  • Processing
  • Tanker trucks
  • Wineries

Tags: ,
Posted in Products | No Comments »